The article presents the results of wheel wear tests of selected EN97 series electric multiple units. In the tests carried out on the 14 vehicles mentioned above, which were driven on the same route, geometrical parameters of the profile of all wheels were recorded during periodic inspections. The analyzed data concerned the period of over two years of use, when the vehicles were delivered from the manufacturer to the carrier as new. In the form of graphs, cases of exceeding a given parameter in relation to the requirements set in the Maintenance System Documentation are presented, broken down into individual wheelsets. The article presents the results of operational tests, which show which wheel set parameters (wheel diameter, rim steepness, rim thickness, rim height, etc.) are most often exceeded and which are least. The analyzes of the geometric parameters of the wheel profile on the tested group of vehicles, which were used on the same route in the same period, clearly prove that the parameters most often exceeded are wheel diameter and rim steepness. These two exceeded parameters were the basis for turning the wheelsets.
The investigations were carried out within the Implementation Doctorate Program of the Ministry of Education and Science realized in the years 2021-2025
Adamiec P, Witaszek M, Witaszek K. Wear intensity of tyre steels (in Polish). Scientific Journals of the Silesian University of Technology. Series: Transport. 1998;30:71-78.
Documentation of the 33WE electric traction unit maintenance system (in Polish). Bydgoszcz, 04.2013.
Documentation (Technical and Operating) of the Electric Multiple Unit Type 33WE. PESA, Bydgoszcz 2011.
Far M. Technical characteristics of the electric multiple unit type 33WE (in Polish). Institute of Rail Vehicles. Poznań 2011.
Firlik B, Staśkiewicz T. Challenges and opportunities of tram wheel profile design. Proceedings of the Fifth International Conference on Railway Technology: Research, Development and Maintenance. Montpellier 2022.08.22-25.
Instruction MKT-9. Instructions for measurements and technical assessment of traction vehicle wheel sets (in Polish). Majkoltrans Sp. z o.o. Wrocław 2018.
Konowrocki R, Chojnacki A. Analysis of rail vehicles’ operational reliability in the aspect of safety against derailment based on various methods of determining the assessment criterion. Eksploat Niezawodn. 2020;22(1):73-85.
Kortas P. ENRail vehicals wheels wear and re-profiling (in Polish). Scientific Journals of the Silesian University of Technology. Series: Transport. 2013;79:61-69.
Kowalski S, Lachowski P. Selected damage and wear of wheelsets of rail vehicles (in Polish). Autobusy – Technika, Eksploatacja, Systemy Transportowe. 2018;12:480-485.
Kustosz J, Goliwas D, Kaluba M. A tool for calculating braking distances of rail vehicles. Rail Vehicles/Pojazdy Szynowe. 2022;3-4:15-19.
Kwaśnikowski J, Małdziński L, Borowski J, Firlik B, Gramza G. Analysis of the causes of accelerated wear of the rolling surfaces of the SA 108 (215M) rail bus wheels (in Polish). Rail Vehicles/Pojazdy Szynowe. 2007;2:1-13.
Madej J. Analysis of the traction efficiency of a set of wheels of a rail vehicle in a curve of a track with a small radius (in Polish). Rail Vehicles/Pojazdy Szynowe. 2008;1:1-6.
Michnej M. Fretting ware process in swivel jointson example of automatic whellset gauge changing system (in Polish). Technical Journal. Publishing House of the Cracow University of Technology. 2012;14:159-166.
Piec P. Analysis of wear wheel rim wheelsets rail vehicles (in Polish). Logistyka. 2014;3:5060-5068.
Piec P. Study operational wear of wheel sets of rail vehicles in the aspect holistic tribology (in Polish). Logistyka. 2015;6:1235-1250.
Raport roczny WKD 2021/Annual Report (in Polish). Kolej Samorządowa.
Sawczuk W, Cañás Rilo AM. The issues of hot-spots type in the railway disc brake. Rail Vehicles/Pojazdy Szynowe. 2021;1:33-43.
Słowiński MS. Materials used in the construction of rail vehicle wheels. Rail Vehicles/Pojazdy Szynowe. 2021;(4):14-24.
Słowiński MS. The characteristics of the selected types of wheel wear and their effect on the rail vehicle – track interaction. Rail Vehicles/Pojazdy Szynowe. 2022;(1-2):3-9.
Sobaś M. Wheel wear during the operation of rail vehicles. Causes and effects. Rail Vehicles/Pojazdy Szynowe. 2021;2:16-28.
Zbieć A. Causes of uneven wear of wheelsets in freight wagons (in Polish). Prace Instytutu Kolejnictwa. 2017;155:43-47.
Journals System - logo
Scroll to top